Add functions in SceAVConfig

1 files changed, 98 insertions, 0 deletions

diff --git a/include/user/avconfig.h b/include/user/avconfig.h
index d171647..46d49c8 100644
--- a/include/user/avconfig.h
+++ b/include/user/avconfig.h
@@ -7,6 +7,37 @@
 extern "C" {
 #endif
 
+#define SCE_AVCONFIG_VOLCTRL_UNK_0     0
+#define SCE_AVCONFIG_VOLCTRL_ONBOARD   1
+#define SCE_AVCONFIG_VOLCTRL_BLUETOOTH 2
+#define SCE_AVCONFIG_VOLCTRL_UNK_3     3
+#define SCE_AVCONFIG_VOLCTRL_UNK_4     4
+
+#define SCE_AVCONFIG_AUDIO_DEVICE_VITA_0       0x001 //!< Not Dolce
+#define SCE_AVCONFIG_AUDIO_DEVICE_MULTI_CN     0x002 //!< (sceSysconGetMultiCnInfo & 0xff00) == 0x300 (from SceHpremoteForDriver_2229EF51)
+#define SCE_AVCONFIG_AUDIO_DEVICE_AUDIO_OUT    0x004 //!< 3.5mm audio out
+#define SCE_AVCONFIG_AUDIO_DEVICE_HDMI         0x008 //!< HDMI audio out
+#define SCE_AVCONFIG_AUDIO_DEVICE_BT_AUDIO_OUT 0x010 //!< Bluetooth audio out
+#define SCE_AVCONFIG_AUDIO_DEVICE_VITA_8       0x100 //!< Not Dolce
+#define SCE_AVCONFIG_AUDIO_DEVICE_AUDIO_IN     0x400 //!< 3.5mm audio in
+#define SCE_AVCONFIG_AUDIO_DEVICE_BT_AUDIO_IN  0x800 //!< Bluetooth audio in
+
+#define SCE_AVCONFIG_REG_BT_MIC       0
+#define SCE_AVCONFIG_REG_AVLS         1
+#define SCE_AVCONFIG_REG_SOUND_OUTPUT 2
+#define SCE_AVCONFIG_REG_AVLS_TIMER   3
+#define SCE_AVCONFIG_REG_SPEAKER_MUTE 4
+
+#define SCE_AVCONFIG_VOLKEY_END  0
+#define SCE_AVCONFIG_VOLKEY_UP   1
+#define SCE_AVCONFIG_VOLKEY_DOWN 2
+
+#define SCE_AVCONFIG_CB_FLAG_UNK_1      0x01
+#define SCE_AVCONFIG_CB_FLAG_BT_VOL     0x02
+#define SCE_AVCONFIG_CB_FLAG_AVLS       0x04
+#define SCE_AVCONFIG_CB_FLAG_FORCE_AVLS 0x08
+#define SCE_AVCONFIG_CB_FLAG_MUTED      0x10
+
 /**
  * Get the maximum brightness.
  *
@@ -60,6 +91,73 @@ int sceAVConfigSetSystemVol(int volume);
  */
 int sceAVConfigMuteOn(void);
 
+/**
+ * Write to the registry key /CONFIG/SOUND/main_volume.
+ *
+ * @param vol - Volume level 0 to 30
+ *
+ * @return 0 on success, < 0 on error.
+ */
+int sceAVConfigWriteRegSystemVol(SceUInt32 vol);
+
+/**
+ * Get volume control information.
+ *
+ * @param[out] volCtrl - Device which has volume controlled. If the volume
+ * cannot be controlled, then this address is not written to.
+ * @param[out] muted - Deviced muted state
+ * @param[out] avls - Device AVLS state
+ *
+ * @return 0 on success, < 0 on error.
+ */
+int sceAVConfigGetVolCtrlEnable(SceUInt32 *volCtrl, SceBool *muted, SceBool *avls);
+
+/**
+ * Get connected audio devices.
+ *
+ * @param[out] flags - Bitwise OR of device flags
+ *
+ * @return 0 on success, < 0 on error.
+ */
+int sceAVConfigGetConnectedAudioDevice(SceUInt32 *flags);
+
+/**
+ * Set configuration values which correspond to registry entries. Does not change the registry.
+ *
+ * @param key - Registry derived value to change
+ * @param value - Value to set to
+ *
+ * @return 0 on success, < 0 on error.
+ */
+int sceAVConfigChangeReg(SceUInt32 key, int value);
+
+/**
+ * Send Bluetooth volume key
+ *
+ * @param key - Key to send
+ *
+ * @return 0 on success, < 0 on error.
+ */
+int sceAVConfigSendVolKey(SceUInt32 key);
+
+/**
+ * Get Bluetooth volume information
+ *
+ * @param[out] unk - Unknown
+ * @param[out] vol - Volume
+ *
+ * @return 0 on success, < 0 on error.
+ */
+int sceAVConfigGetBtVol(int *unk, SceUInt32 *vol);
+
+/**
+ * Set OLED/LCD colour space mode
+ *
+ * @param mode - 0 default, 1 high saturation
+ *
+ * @return 0 on success, < 0 on error.
+ */
+int sceAVConfigSetDisplayColorSpaceMode(SceUInt32 mode);
 
 #ifdef __cplusplus
 }